Added to cart

Peterbilt 579 Grille Guards

Peterbilt 579 Grille Guards

Your 2013-2021 Peterbilt 579 still needs a good grille guard

The original 579 body, built from 2013 through 2021, is the version you see at almost every truck stop. A lot of these trucks are on their second or third owner now, running high miles with front ends that cost real money to rebuild. A Peterbilt 579 grill guard is one of the few add-ons that can pay for itself in a single night, and on an older truck the math works even better, because downtime hurts more when the truck is your only one. Fleets buying used units at auction often add a guard before the truck goes into service for the same reason.

Drivers have different names for the same part. Up north it’s a moose bumper, in deer country it’s a deer guard, and plenty of people just say grille guard. The job is the same everywhere: put a steel frame between the animal and the radiator.

Check the body before anything else

Peterbilt redesigned the 579 for the 2022 model year, and the new body has a different hood, bumper and mounting layout. Guards built for one generation don’t fit the other, so the first step is knowing which truck you have. The older body has long, smoothly swept headlights. The newer one has sharper, more angular lamps set into the hood.

Read the year range on each listing, too. Some designs cover 2013-2021 and a few stop at 2020, so check that your model year falls inside the range printed on the page. A handful of trucks titled as 2022 were still built on the older body, and those generally take the older-style guards. When the paperwork and the truck don’t seem to agree, send our team the VIN and a photo of the front, and we’ll tell you which Peterbilt 579 bumper guard lines up with your mounts.

What a strike costs without one

The front of a 579 is mostly composite and aluminum. Behind the fiberglass hood sit the radiator and charge air cooler, packed close to the grille, with a headlight in each corner. A deer at highway speed can crack the hood, fold the cooling stack back and knock out a lamp in one hit. On an older truck, finding a used hood in good shape can take longer than the repair itself, and the truck sits the whole time. 

A Peterbilt 579 deer guard doesn’t stop the impact, but it spreads it across a frame that’s bolted to the chassis instead of to the hood. In most strikes that means a bent bar or a scuffed finish instead of a tow. Deer activity peaks in the fall, with November the worst month in most states, and dawn and dusk are the riskiest hours. That’s prime driving time for anyone running overnight freight.

How much coverage you need

Guards for this truck come in a range of sizes. Compact designs cover the center of the grille and the radiator, keep weight low and leave most of the bumper visible. Large designs reach out to the headlights and bumper corners, which matters on two-lane roads where animals come from the ditch at an angle. Full-front versions run almost the entire width of the truck for the most protection. 

A heavy-duty Peterbilt 579 moose bumper makes the most sense for trucks that spend their nights on rural highways in the northern states or in Canada, where a moose or an elk can do far more damage than a deer. 

Finish, material and lights

The type of finish you choose has more of an impact on maintenance requirements than on the level of protection provided. Polished chrome and stainless steel look striking alongside chrome-plated bumpers and exhaust pipes, and a quick wipe is all it takes to restore their shine. Stainless won’t rust, but road salt can leave brownish stains on it, and a stainless cleaner every few weeks in winter takes care of that. Black hides grime and suits darker trim. Gray guards made from coated high-tensile steel are the low-maintenance choice for fleets, since the coating shrugs off salt and doesn’t need polishing.

Lights are optional on most designs. You can choose a guard without lights or have it set up with an LED bar or a pair of square or round lamps, and a few come with a light bar built into the frame. On dark rural roads the extra light helps you spot eyes in the ditch a little sooner.

Radar, fog lamps and the hood

Many 579s from this era carry a collision mitigation radar low on the bumper. A guard must leave that sensor a clear line of sight, or the system will throw faults and stop working. If your truck has radar, or fog lamps set into the bumper, send us a photo before ordering so we can confirm the design fits around them.

The hood still has to tilt for every pre-trip. Depending on the model, the guard either swings forward on a latch you can work with one hand or folds out of the way on hinged brackets. Make sure whoever does the daily checks knows how it opens before the first morning on the road. In winter, a drop of light oil on the pivot points keeps the latch from freezing shut.

Installing it

These are aftermarket guards that bolt to factory points with vehicle-specific brackets, and no cutting, welding or drilling is needed. Your regular mechanic, a body shop or an owner-operator with common hand tools can handle the job. Plan on a helper, since even a compact frame is heavy and awkward to hold square. Snug all the bolts first, check that the guard sits evenly on both sides, then tighten to spec. A little anti-seize on the bracket bolts makes the guard much easier to remove years later. Re-check the bolts after the first few hundred miles, and again at your next PM service.

Ordering and delivery

Orders are handed to the carrier within 24 hours, weekends and holidays excluded. A guard ships by freight, so it needs a commercial or warehouse address and a phone number the driver can reach. Open the packaging and look the guard over before you sign for it, because damage noted on the delivery receipt is much easier to claim. 

FAQ

Will these guards fit a 2022 or newer 579?

No, unless the truck was built on the older body. The redesigned 579 has its own guards, and we carry those too.

Does a guard hurt fuel economy?

Any guard adds weight and some drag. A compact design adds the least, so if every tenth of a mile per gallon counts, start there.

Can I move a guard from one 579 to another?

Yes, as long as both trucks are on the same body and fall within the guard’s listed year range. Keep every bracket and bolt together when you take it off.

Can I use a guard on a work truck that sees gravel roads?

Yes. A Peterbilt 579 brush guard with a coated finish handles gravel, brush and mud well, and small chips in the coating are easy to touch up with a little paint.

A guard costs a small fraction of a front-end rebuild and spares you weeks without the truck. Check your body style, pick the coverage, that fits your routes and order through tacoma-truckparts.com.